NetBorder Session Controller

Description

Configuration

REST Name

configuration

Methods

retrieve: Retrieve
update: Update

Properties

Name	Data	Possible Values	Description
`primary_bus_port`	Type string Default 5405		port
`backup_interface`	Type Enumeration Default __selectone__	Rules required Values __selectone__ - (None)	Backup Network / Interface Network interface used on backup link, in case the dedicated link is broken.
`dedicated_interface`	Type Enumeration Default __selectone__	Rules required Values __selectone__ - (None)	Dedicated Network / Interface Network interface used on dedicated network link between servers. Use private IP address range for dedicated network in case of direct cable connection 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255
`clustername`	Type string Default default_cluster	Rules required alpha_dash	Cluster Name Provide unique cluster name in case of multiple clusters in single network.
`migrate_threshold`	Type string Default 3		Number of failures for triggering migration Number of attempts.
`secondary_bus_addr`	Type string Default 226.26.100.98		Secondary Bus
`resource_stickiness_score`	Type string Default 1		score
`primary_bus_addr`	Type string Default 226.24.100.98		Primary Bus
`loglevel`	Type Enumeration Default debug	Rules required Values debug - Debug info - Info	Log level Minimum level for log messages.
`secondary_bus_port`	Type string Default 5405		port
`resource_stickiness`	Type Enumeration Default score	Rules required Values score - Stickiness score sticky - Fully sticky	Resources stickiness after migration "Stickiness score": migrate resources if constraint score is higher that stickiness, use "0" to migrate resources back after failure recover of original master node. "Fully sticky": cluster will not migrate resources unless resource fails or node leaves cluster.
`mode`	Type Enumeration Default disabled	Rules required Values disabled - Disabled active-passive - Active/passive	Operational Mode Configures the mode of operation for high availability object(stdClass)#478 (1) { ["Disabled"]=> array(1) { [0]=> string(34) "Disable high availability feature." } } object(stdClass)#479 (1) { ["Active/passive"]=> array(1) { [0]=> string(26) "Enable active-passive mode" } }
`db_cluster_port`	Type string Default 3307		Database Cluster Port
`failed_timeout`	Type string Default 300		Resource ban timeout after migration due to failures Time in seconds to kee resources away after migration due to failed resource startup.
`current_node_name`	Type string Default Primary_Node		Name for current node on peers Name used to identify this node on peer node configuration.